TM 9-2350-277-34
REPLACE TRANSMISSION Continued
0035 00
3.
Install end cover (13) and secure with six screws (11) and washers (12) on transmission. TIGHTEN SIX SCREWS TO
156-180 IN-LB (18-20 N m) TORQUE.
4.
Install two variable speed clutch hose clamp brackets (12) on transmission. Secure with two screws (13) and
washers (14).
5.
Mount two variable speed hose clamps (11) on brackets (12) with two screws (8), washers (9), and new locknuts (10).
6.
Position wiring harness (10) on transmission and connect rear connector (9) and front connector (8).
0035 00-12