TM 9-2350-277-34
REPAIR/REPLACE ACCELERATOR STOP SUPPORT ASSEMBLY — Continued
0018 00
3.
Prepare and paint surface in accordance with TM 43-0139.
4.
Position nut (2) on support (1). Secure with two rivets (3).
5.
Install nut (4) and screw (5) into nut (2).
FOLLOW-THROUGH STEPS
1.
Install upper accelerator pedal (see your -20).
2.
Install driver’s seat (see your -20).
3.
Connect battery ground strap (see your -20).
4.
Start engine (see your -10). Check that accelerator pedal works right.
5.
Raise and lock ramp (see your -10).
6.
Stop engine (see your -10).
END OF TASK
0018 00-3/4 blank
