TM 9-2350-277-34 SERVICE UPON RECEIPT 0013 00 THIS WORK PACKAGE COVERS: Service upon receipt (Checking Unpacked Equipment). INITIAL SETUP: Maintenance Level Direct Support Tools and Special Tools General Mechanic’s Tool Kit (WP 0120 00, Item 62) Personnel Required Track Vehicle Repairer 63H10 References TM 9-2350-277-10 TM 9-2350-277-20 Equipment Condition Engine stopped (see your -10) SERVICE UPON RECEIPT OF MATERIEL Checking Unpacked Equipment This section provides information on how to check and service your carrier when it is received. Level B and A deprocessing procedures are given in the following table. Level B deprocessing is performed when the carrier have been in storage for less than ninety (90) days.  Level A deprocessing is performed, in addition to Level B deprocessing, when the carrier has been in storage for more than 90 days. SERVICE UPON RECEIPT LOCATION ITEM ACTION REMARKS Hull Driver’s Hatch Remove welded nut/bolt from driver’s hatch to gain vehicle entry Engine Engine Air Intake (1)   Remove air restrictor plug from air duct at air filter. (2)   Connect filter host to air filter. (3)   Remove warning tag. Engine Fuel lines (1)   Connect fuel lines at quick disconnect. (2)   Connect fuel supply tubing. Engine Crankcase Remove shipping tape from crankcase breather. Engine Oil level gauge Remove shipping tape from oil level gauge rod opening. Engine Caps and plugs Remove caps and plugs from all openings to engine that vent outside. Engine Power plant access panels Install power plant access panels. Hull Carrier batteries (1)   Remove shipping tape from filler caps. (2)   Add electrolyte and charge batteries. See TM 9-6140-200-14. Hull Battery Cables Install cables on battery .  See your -20. 0013 00-1