TM 9-2350-277-20-6
REPAIR POWER CONTROL ENCLOSURE FACEPLATE AND BRACKET (M1068A3 ONLY)
— Continued
0828 00
ASSEMBLY
1.
Install toggle switch S1 (1), locking ring (2), lockwasher (3), and nut (4) on faceplate (5).
2.
Install circuits 20A and 20B leads (6), screw (7), and lockwasher (8) on terminal 3 of toggle switch S1 (1).
3.
Install circuits 19A and 19B leads (9), screw (7), and lockwasher (8) on terminal 2 of toggle switch S1 (1).
NOTE
There are 12 circuit breakers alike. All circuit breakers are installed in the same way. Art work
shows the installation of one circuit breaker. Use wiring diagram in the back of the manual.
4.
Install circuit breaker CB17 (10), locking ring (11), lockwasher (12), and nut (13) on faceplate (5).
5.
Install circuit 19A lead (14), screw (15), and lockwasher (16) on terminal 2 of circuit breaker CB17 (10).
6.
Install circuit 17C lead (17), screw (15), and lockwasher (16) on terminal 1 of circuit breaker CB17 (10).
7.
Install circuit breaker (18) on faceplate (5). Secure with two new lockwashers (19) and screws (20).
8.
Install circuit lead(s) (21) to terminal 1 (22) and terminal 2 (23) with two lockwashers (24) and nuts (25).
0828 00-8
