TM 9-2350-277-20-6REPLACE CHEMICAL ALARM M43 UNIT INTERFACE WIRING HARNESSES (M113A3ONLY) — Continued0923 006. Install insulator washer (11), flat washer (10), lockwasher (9), nut (8), bushing (7), retainer (6), spring tension washer (5)and coupling nut (4) on harness (12).7. Install four backshells (2) and C-clip retainers (1) on leads (3).8. Attach wiring harness (13) to bracket (14) with four screws (15) and new locknuts (16).9. Attach four leads (3) to leads (17) as follows:509E to 509G509F to 509H6D POS to 6E POS7D NEG to 7E NEG10. Install bracket (14) on vehicle with four screws (18) and washers (19).FOLLOW-THROUGH STEPS1. Connect battery ground strap (WP 0337 00).2. Start engine (see your -10).3. Raise and lock ramp (see your -10).4. Stop engine (see your -10).END OF TASK0923 00-7/8 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
