TM 9-2350-277-20-6
REPLACE CHEMICAL ALARM M43 UNIT INTERFACE WIRING HARNESSES (M113A3
ONLY) — Continued
0923 00
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
1.
Check leads for continuity.
2.
Inspect harnesses for damage.
3.
Check multiple pin connector for damage. If damaged, notify supervisor.
REPAIR OR REPLACEMENT
1.
Repair damaged single pin connectors (WP 0382 00).
INSTALLATION
1.
Route harness (2) and cable (7) through clamps (6). Secure to hull with washers (5) and screws (4).
2.
Attach connector (1) on wiring harness (2) to jack on bottom of junction box (6).
0923 00-4
