TM 9-2350-277-20-6REPLACE FIXED FIRE EXTINGUISHER CYLINDER AND MOUNT — Continued 0898 001. Support cylinder (1) and loosen two clamps (2). Remove cylinder from four hull brackets.2. Remove four cotter pins (3), pins (4), and two clamps (2) from hull brackets. Discard cotter pins.3. If needed, remove four bumpers (5) from hull brackets.INSTALLATIONNOTEThe carbon dioxide (CO2 )cylinder has a 5-pound (2 kg) capacity with a maximum weight of 18pounds (8 kg). Weigh cylinder before installation. If weight loss is more than 10 percent (2pounds) (1 kg), replace cylinder with a fully charged one.1. If removed, install four bumpers (5) in hull brackets.2. Place two clamps (2) on hull brackets. Secure with four pins (4) and new cotter pins (3).3. Hold cylinder (1) on hull brackets. Secure with two clamps (2). TIGHTEN CLAMPS TO 51-59 LB-IN (5-6 N m)TORQUE.FOLLOW-THROUGH STEPS1. Install discharge tube on cylinder (WP 0899 00).2. Install control valve (WP 0904 00).END OF TASK0898 00-2
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
