TM 9-2350-277-20-6
REPLACE SINGLE POINT LAN CABLE (W40) (M1068A3 ONLY) — Continued
0851 00
INSTALLATION
1.
Install cable W40 (1) in carrier.
2.
Remove dust cap (2) from DC power extension box A8 (3) jack J17 (4).
3.
Connect cable W40 plug (5) to DC power extension box A8 (3) jack J17 (4).
4.
Connect cable W40 plug 2 (6) to single point LAN ground box A15 (7) jack J1 (8).
5.
Secure excess cable slack with new electrical tie-down strap (9).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
2.
Turn MASTER SWITCH ON (see your -10). Check that electrical system works properly.
3.
Turn MASTER SWITCH OFF (see your -10).
END OF TASK
0851 00-3/4 blank
