TM 9-2350-277-20-5
REPLACE M13 NBC HEATER WIRING HARNESS (M577A3 ONLY) Continued
0808 00
12. In drivers compartment, install four clamps (10) on cable (11) and wiring harness (9).
13. Install four screws (12), new lockwashers (13), and four clamps (10) on weldnuts.
14. Connect wiring harness (9) to control box (14).
15. Install ground lead (15), two lockwashers (16), and screw (17) on control box (14).
16. Install new straps (18) along cable (11) and adjacent wiring harness (9).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
END OF TASK
0808 00-6