TM 9-2350-277-20-5
REPLACE M8A3 NBC HOSES AND BRACKETS (M577A3 ONLY)
0785 00
THIS WORK PACKAGE COVERS:
Removal (page 0785 00-1).
Installation (page 0785 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Lockwasher (6)
Locknut (6)
Personnel Required
Unit Mechanic
References
See your -10
see TM 3-6680-316-10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
REMOVAL
NOTE
Hose location may vary on air purifier.
1.
Loosen clamp (1) at air purifier (2) and remove driver’s station hose (3) from connector (4), bracket (5), and air purifier.
2.
Push hose (3) with grommet (6) through frame (7). If damaged, remove grommet.
3.
Remove two screws (8), lockwashers (9), and bracket (5) from driver’s bulkhead. Discard lockwashers.
4.
Loosen clamp (1) at air purifier (2), and remove commander’s station hose (10) from connector (11), bracket (12),
bracket (13), and air purifier (2).
5.
Remove four screws (14), lockwasher (15), bracket (12), and bracket (13) from forward compartment bulkhead. Discard
lockwashers.
6.
Loosen clamps (1) at air purifier (2), and remove two crew hoses (16) and (17) from connectors (18) and (19), two
brackets (20), and bracket (21).
0785 00-1
