REPLACE M14 AIR PURIFIER AND FRAME (M113A3 ONLY)

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-5_636

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
529

TM 9-2350-277-20-5 REPLACE M14 AIR PURIFIER AND FRAME (M113A3 ONLY) 0774 00 THIS WORK PACKAGE COVERS: Removal (page 0774 00-1). Installation (page 0774 00-2). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Locknuts (24) Locknuts (5) Personnel Required Unit Mechanic References See your -10 See FM 21-40 TM 3-6680-316-10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Battery ground strap disconnected (WP 0337 00) REMOVAL WARNING Contaminated filters are hazardous to personnel. Use precautions when handling filters (see FM 21-40). Dispose of filters using trained chemical environment personnel. 1. Disconnect power cable (1) from air purifier (2). 2. Remove three hoses (4) from air purifier (2). 3. Unfasten latch (5) and lift air purifier (2) from frame assembly (6). 4. Remove five screws (7), 10 washers (8), five locknuts (9), and frame assembly (6) from five mounts (10) and (11). Discard locknuts. 5. Remove 16 screws (12), 32 washers (13), 16 locknuts (14), and four mounts (10) from welded frame (15). Discard locknuts. 6. Remove ground wire lead (16). 7. Remove four screws (17), eight washers (18), four locknuts (19), and mount (11) from bracket (20). Discard locknuts. 0774 00-1

Privacy Statement
Press Release
Contact