TM 9-2350-277-20-5
REPLACE ENGINE TO BATTERY BOX HOSE Continued
0714 00
INSTALLATION
1.
If required, install elbow (6) in floor plate with locknut (5).
2.
Install new grommet (4) in battery box.
3.
Connect hose (2) to battery heater plate elbow (3) and secure with clamp (1).
4.
Route hose (2) from battery box heater plate (7) to elbow (6) on floor plate.
5.
Install clamp (8) on hose (2). Connect hose (2) to elbow (6). Tighten clamp.
6.
Install clamp (9) on hose (2) and secure to seat bracket (10) with screw (11), washer (12), and nut (13).
7.
Install clamp (14), hose (2), and hose (15) on standoff (16) with screw (17) and washer (18).
8.
Install clamp (19) on hose (20). Connect hose (20) on elbow (6). Tighten clamp.
9.
Connect hose (20) to engine coolant pump elbow (21) and secure with clamp (22).
0714 00-4