TM 9-2350-277-20-4
REPLACE REAR EXTERNAL STOWAGE FRAME (M1068A3 ONLY)
0626 00
THIS WORK PACKAGE COVERS:
Removal (page 0626 00-1).
Installation (page 0626 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Cotter pin (2)
Locknut (4)
Personnel Required
Unit Mechanic
Helper (H)
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
REMOVAL
1.
Loosen two straps (1) and remove stowed equipment from rear external stowage frame (2).
2.
Remove two straps (1) from loops on hull rear plate and frame (2).
3.
Remove two cotter pins (3), shouldered pins (4), four washers (5), and rear external stowage frame (2) from two mounts
(6). Discard cotter pins. Have helper hold up one side.
4.
Remove four screws (7), washers (8), and two mounts (6) from hull rear plate.
5.
Remove four locknuts (9), screws (10), eight washers (11), and pad (12) from rear external stowage frame (2). Discard
locknuts.
0626 00-1
