TM 9-2350-277-20-4
REPLACE RIGHT SIDE RACK BASE (M1068A3 ONLY) Continued
0622 00
INSTALLATION
1.
Position base (1) on bulkhead mounts. Secure with three washers (2) and screws (3).
2.
Install four washers (4), two screws (5), and new locknuts (6) on base (1) and sponson.
3.
Position base extension mount (7) on battery box. Secure with four screws (8), eight washers (9), new lockwashers (10),
and four nuts (11)
4.
Install bolt (12), headed pin (13), washer (14), and new cotter pin (15) on base extension mount (7).
0622 00-3