TM 9-2350-277-20-4
REPLACE RIGHT SIDE RACK BASE (M1068A3 ONLY)
0622 00
THIS WORK PACKAGE COVERS:
Removal (page 0622 00-1).
Installation (page 0622 00-3).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Cotter pin
Locknut (2)
Lockwasher (8)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Battery ground lead disconnected (WP 0338 00)
Batteries removed (WP 0347 00)
Right side shelf assembly removed (WP 0621 00)
REMOVAL
1.
Remove four screws (1) and bumper (2) from base extension (3).
2.
Remove three screws (1) and bumper (2) from base (4).
3.
Loosen two nuts (5)(6) and pivot bolt (7) securing base extension (3). Raise base extension and position on base (4).
4.
Remove 12 screws (8) and hinge (9) from base extension (3) and base (4).
0622 00-1
