TM 9-2350-277-20-4
REPLACE LEFT SIDE RACK BASE (M1068A3 ONLY)
0616 00
THIS WORK PACKAGE COVERS:
Removal (page 0616 00-1).
Installation (page 0616 00-3).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Locknut (10)
Personnel Required
Unit Mechanic
References
See your -10
TM 11-7010-256-12&P
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Electronic/Communication equipment removed
(TM 11-7010-256-12&P)
A.C. and D.C. power extension boxes and mounts
removed (WP 0834 00)
U.P.S. power extension box removed (WP 0822 00)
Printer mount removed (WP 0823 00)
REMOVAL
1.
Remove eight screws (1) and two bumpers (2) from rack base (3).
2.
Remove two pins (4), lower two work surface assemblies (5), and remove two springs (6).
3.
Raise two work surface assemblies (5). Remove four locknuts (7), screws (8), washers (9), washers (10), and two work
surface assemblies (5) from rack base (3). Discard locknuts.
4.
Remove two screws (11), washers (12), and pins (4) with lanyards from two frames (13).
0616 00-1
