TM 9-2350-277-20-4
REPLACE WINDSHIELD STOWAGE BRACKET (M1064A3 ONLY) Continued
0614 00
INSTALLATION
1.
If removed, apply thin coat of adhesive to pads (9)(10)(11) and bracket (3) or pads (8) and retainer (4). Press pads firmly
in place on mounting surface.
2.
Place strap (7) on bulkhead bracket. Secure with pin (6) and new cotter pin (5).
Align retainer (4) and bracket (3) on rear bulkhead. Secure with four washers (2) and screws (1).
END OF TASK
0614 00-2