TM 9-2350-277-20-4
REPLACE RADIO STOWAGE RACK (M1064A3 ONLY)
0609 00
THIS WORK PACKAGE COVERS:
Removal (page 0609 00-1).
Installation (page 0609 00-1).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Locknut (8)
Lockwasher (13)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Radio and mount removed (WP 0890 00)
REMOVAL
1.
Remove locknut (1), lockwasher (2), washer (3), hanger (4), and screw (5) from top plate crossmember. Discard locknut
and lockwasher.
2.
Remove locknut (6), two lockwashers (7), hanger (8), and screw (9) from top plate lug. Discard locknut and lockwashers.
3.
Remove two locknuts (10), four lockwashers (11), two hangers (4)(8), and two screws (12) from rack (13). Discard
locknuts and lockwashers.
4.
Remove four locknuts (14), eight lockwashers (15), four screws (16), and rack (13) from bulkhead lugs. Discard
locknuts and lockwashers.
INSTALLATION
1.
Align rack (13) with bulkhead lugs. Secure with four screws (16), eight new lockwashers (15), and four new
locknuts (14).
2.
Align two hangers (4)(8) with rack (13). Secure with two screws (12), four new lockwashers (11), and two new
locknuts (10).
3.
Align hanger (8) with top plate lug. Secure with screw (9), two new lockwashers (7), and new locknut (6).
4.
Align hanger (4) with top plate crossmember. Secure with screw (5), new lockwasher (2), washer (3), and new
locknut (1).
0609 00-1
