REPLACE VERTICAL AMMUNITION RACK (M1064A3 ONLY)

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-4_800

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
669

TM 9-2350-277-20-4 REPLACE VERTICAL AMMUNITION RACK (M1064A3 ONLY) 0608 00 THIS WORK PACKAGE COVERS: Removal (page 0608 00-1). Installation (page 0608 00-3). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) REMOVAL NOTE Vertical ammunition racks in the M1064A3 carrier are replaced the same way. Racks differ in size and capacity. 1. Remove twelve screws (1), washers (2), and rack (3) from side hull and top plate. 2. Remove eleven screws (4), washers (5), and rack (6) from side hull and sponson. 3. If damaged, remove ten straps (7) from loops (8) on left side hull. 4. If damaged, remove two straps (9) from loops (10) on sponson side plate. 5. If damaged, remove two decals (11) from sponson side plate. 6. If damaged, remove decal (12) from sponson side plate. 0608 00-1

Privacy Statement
Press Release
Contact