TM 9-2350-277-20-4REPLACE RIGHT REARWARD TABLE (M577A3 ONLY) 0582 00THIS WORK PACKAGE COVERS:Removal (page 0582 00-1).Installation (page 0582 00-2).INITIAL SETUP:Maintenance LevelUnitTools and Special ToolsGeneral Mechanic’s Tool Kit (WP 0926 00, Item 65)Materials/PartsLocknut (12)Locknut (2)Lockwasher (8)Personnel RequiredUnit MechanicReferencesSee your -10Equipment ConditionEngine stopped (see your -10)Carrier blocked (see your -10)Ramp lowered (see your -10)REMOVAL1. Remove sixteen screws (1), eight spacers (2), and two drop leaves (3) from table top (4).2. Remove eight screws (5), lockwashers (6), and four catches (7) from two drop leaves (3). Discard lockwashers.3. Remove three nuts (8), washers (9), screws (10), and table top (4) from hull.NOTEShims (flat washers – two maximum) may be required to obtain clearance between screw andsupport bracket.4. Remove two locknuts (11), washers (12), screws (13), four table supports (14), and shims (if installed) from hull.Discard locknuts.5. Remove sixteen screws (15), eight spacers (16), hinges (17), and four supports (14) from table top (4).6. Remove twelve locknuts (18), washers (19), screws (20), and four braces (21) from supports (14). Discard locknuts.0582 00-1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business