TM 9-2350-277-20-4
REPLACE RIGHT FORWARD TABLE (M577A3 ONLY) — Continued
0581 00
INSTALLATION
1.
Position bracket (1) on radio rack (2) and secure with two screws (3), washers (4), and new locknuts (5).
2.
Install clip (6) on bracket (1) and secure with screw (7), washer (8), and new locknut (9).
3.
Position dropleaf rod (10) in bracket (1) and insert headless pin (11) through radio rack (2), dropleaf rod (10) and bracket
(1). Secure with two washers (12) and new cotter pin (13).
4.
Align two strikes (14) on table top (15). Secure with four key washers (16) and eight screws (17).
5.
Install three hinges (18) on hull. Secure with six screws (19) and new locknuts (20).
6.
Align three key washers (21) between hinges (18) and table top (15). Secure with six screws (22).
Lower table top (15) and secure two catches (23) on battery box to strikes (14).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0581 00-3/4 blank
