TM 9-2350-277-20-4
REPLACE AN/VVS-2 DRIVER’S NIGHT VISION MOUNT (ALL EXCEPT M58)
0537 00
THIS WORK PACKAGE COVERS:
Removal (page 0537 00-1).
Installation (page 0537 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Adhesive (WP 0928 00, Item 3)
Adhesive (RTV) (WP 0928 00, Item 6)
Lockwasher (4)
Lockwasher (3)
Seal
Seal
Spring
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Driver’s hatch opened (see your -10)
Driver’s night vision removed (see your -10)
Driver’s night vision guard removed (WP 0536 00)
REMOVAL
1.
Loosen two viewer handles (1) on mount (2) and slide back rear cleat (3). Remove plug (4) from mount.
2.
Remove three screws (5), lockwashers (16) and mount (2) from driver’s hatch (6), and mounting hatch (17). Discard
lockwashers
3.
Remove seal (7) from mounting hatch (17). Discard seal.
4.
Remove two viewer handles (1) and rear cleat (3) from mount (2).
5.
Remove two screws (8) and handle (9) from rear cleat (3).
6.
Remove four screws (10), lockwashers (11), and two forward cleats (12). Discard lockwashers.
7.
Remove seal (13) from mount (2). Discard seal.
0537 00-1
