INSTALLATION - TM-9-2350-277-20-4

REPLACE COMMANDERS CUPOLA HOLD-OPEN HOOK AND BUMPER (M113A3, M1059A3, M58, AND M1064A3 ONLY)

INSTALLATION (cont) - TM-9-2350-277-20-4_353

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
280

TM 9-2350-277-20-4 REPLACE COMMANDER’S CUPOLA HOLD-OPEN HOOK AND BUMPER (M113A3, M1059A3, M58, AND M1064A3 ONLY) — Continued 0494 00 4. Remove locknut (6), two washers (7), spring (8), two spacers (9), hook (10), and screw (11) from cupola. 5. Remove nut (12), washer (13), bumper (14), and washer(s) (15) from cupola bracket. INSTALLATION NOTE Install washer(s), as needed, to compress bumper 1/4 inch (6 mm) when hold-open hook is engaged. 1. Install washer(s) (15) and bumper (14) in cupola bracket. Secure with washer (13) and nut (12). 2. Align hook (10), two spacers (9), spring (8), and two washers (7) with cupola bracket. Secure with screw (11) and locknut (6). 0494 00-2

Privacy Statement
Press Release
Contact