TM 9-2350-277-20-4
REPLACE STEERING WHEEL LINKAGE — Continued
0430 00
4.
Install bearing (7) with nut (8) in mount (9) on bulkhead.
5.
Tighten nut (8) on bearing (7).
6.
Install shaft (10) into bearing (7)
7.
Install other end of shaft (10) into bearing (11).
8.
Secure bearing (11) to bulkhead with two washers (12), new lockwashers (13), and screws (14).
9.
Install key (15) on shaft (10).
10. Install arm (16) on shaft (10). Align arm with link (17). Secure link on arm with screw (18), washer (19), and new
locknut (20). Secure arm (16) with screw (21) and new locknut (22). TIGHTEN LOCKNUT TO 17-20 LB-FT (23-27
N m) TORQUE.
11. Install washer (23) and new locknut (24) on end of shaft (10).
0430 00-8
