TM 9-2350-277-20-3
REPLACE TOW START CONTROL ASSEMBLY AND BEARING — Continued
0391 00
5.
Install control lever (1) into bearing (2). Secure with clevis pin (3), two washers (4), and new cotter pin (5).
6.
Install clevis pin (6) on control lever (1). Secure with two washers (7) and new cotter pin (8).
7.
Install rear collar (9) with rear setscrew (10) onto cable end of cable assembly (11). Insert end of cable through mounting
hole on clevis pin (6). Install front collar (12) with front setscrew (13) on cable assembly.
8.
Push control handle to full in position. Move lever (1) until contact is made with surface of tow start button (14). Adjust
tow start button (14).
9.
Tighten setscrews (10) and (13).
0391 00-6
