TM 9-2350-277-20-3
REPLACE TRANSMISSION OIL DRAIN TUBES AND BRACKET — Continued
0384 00
4.
Remove drain plug (1) and clamp (2) from tube (3).
5.
Remove screw (4), lockwasher (5), and bracket (6) from bracket (7). Discard lockwasher.
INSTALLATION
1.
Install bracket (6) on bracket (7). Secure with new lockwasher (5), and screw (4).
2.
Install drain plug (1) and clamp (2) on tube (3).
3.
Cut 5-1/4 (13 cm) inch new hose (8) from rubber hosing. Install two clamps (9) on hose (8). Install hose on two tubes
(3) and (10). Tighten clamps.
4.
Install tube (10) on adapter (11). Tighten coupling nut (12).
5.
Install clamp (2) on bracket (6). Secure with screw (13), washer (14), and new locknut (15).
FOLLOW-THROUGH STEPS
1.
Fill transmission with oil (WP 0398 00).
2.
Install power plant (WP 0156 00).
END OF TASK
0384 00-2
