TM 9-2350-277-20-3
REPLACE VENTILATION FAN (M577A3 AND M1068A3 ONLY) — Continued
0383 00
INSTALLATION
1.
Install adapter (6) on blower (7). Secure with three screws (10) and new locknuts (9).
2.
Install adapter (6) and blower (7) on flapper valve (8). Secure with six screws (5), washers (4), and new locknuts (3).
3.
Connect circuit 59 lead (2) to blower lead (1).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
2.
Install battery access cover (see your -10).
3.
Turn MASTER SWITCH and BLOWER switch ON to check that fan operates properly (see your -10).
4.
Turn all switches OFF (see your -10).
5.
Install power plant rear access panel (see your -10).
END OF TASK
0383 00-3/4 blank
