TM 9-2350-277-20-3
REPAIR WIRING HARNESS — Continued
0382 00
d.
Remove sleeve (8) and shell (6) from lead (7).
3.
Remove terminal connector from harness lead.
a.
If lead (1) has nipple (2), slide nipple back on lead.
b.
If lead (1) has insulated sleeving (3), cut and discard sleeving from lead.
c.
If lead (1) is of large diameter, place in vise (4). Cut lead with hacksaw as close as possible to terminal (5). Discard
terminal.
d.
If lead (1) is of small diameter, cut lead as close as possible to terminal (5). Discard terminal.
0382 00-2
