TM 9-2350-277-20-3
REPLACE RIGHT HEADLIGHT WIRING HARNESS — Continued
0373 00
6.
Remove six terminals (1), insulators (2), and connectors (3) from six leads disconnected in Steps 1 - 5. Discard terminals.
7.
Remove tape from circuit 17 and 18 leads (4) and (5) and remove six leads for circuits 17, 18, 20, 25, 514, 515 from hull
bushings (10).
8.
Remove four nuts (6), lockwashers (7), washers (8), and two washers (9) from two bushings (10). Unscrew and remove
bushings from hull. Discard lockwashers.
9.
Remove two screws (11), lockwashers (18), four clamps (13), and harness (12) from two weldnuts (19).
0373 00-2
