TM 9-2350-277-20-3REPLACE STEERING LOCK SWITCH WIRING HARNESS — Continued 0367 006. Install wiring harness (1) on bracket (2). Secure with strap (3).NOTEDo Step 7 for solenoid-activated lock only.7. Install circuit 368A lead (4), ground lead (5), two nuts (6) and lockwashers (7) on solenoid terminals (8).8. Connect circuit leads 369 and 369A (used on solenoid-activated lock) or leads 369A and 368 (used on cable-activatedlock) (9) and (10) to steering locked indicator switch (11).FOLLOW-THROUGH STEPS1. Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).2. Turn MASTER SWITCH to ON (see your -10).3. Place transmission controller in SL position. Check that steering wheel is locked and that STEERING LOCKEDindicator is on (see your -10).4. Turn MASTER SWITCH to OFF (see your -10).END OF TASK0367 00-7/8 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business