TM 9-2350-277-20-3
REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) Continued
0365 00
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
INSPECTION AND REPAIR
1.
Inspect for damaged leads, connectors, and terminals. Repair as needed (WP 0382 00).
INSTALLATION
1.
Install main rear wiring harness (15) in carrier.
2.
Connect circuit 38 lead (11), circuit 38B lead (12), and circuit 38C lead (13) to ramp door switch (14).
3.
Install three clamps (11), new lockwashers (10), and screws (9) on circuit 48B lead (4).
4.
Install circuit 6 lead (3), circuit 48B lead (4), and W4 cable (5) through grommet (7). Connect leads to battery terminal
(6) with screw (1) and nut (2).
0365 00-17