TM 9-2350-277-20-3
REPLACE REAR MAIN WIRING HARNESS (M1064A3 ONLY) — Continued
0364 00
6.
Remove nut (1), washer (2), and rubber bushing (3) around harness (4) from connector (5).
7.
Remove connector (5) from hull.
8.
Pull harness (4) through hole in hull top. Leave connector (5), rubber bushing (3), washer (2), and nut (1) on harness.
9.
Remove screw (6), locknut (7), clamp (8), and harness (4) from upper bilge tube clamp (9). Discard locknut.
10. Remove two screws (10), lockwashers (11), clamps (12), and harness (4) from two lower bilge tube clamps (13). Discard
lockwashers.
0364 00-3
