TM 9-2350-277-20-3
REPLACE HEADLIGHT HIGH BEAM SELECTOR SWITCH — Continued
0333 00
INSTALLATION
1.
Connect cable (5) to rear of switch (4).
2.
Install switch (4) in bracket (3).
3.
Secure switch (4) to bracket (3) with two new lockwashers (2) and screws (1).
FOLLOW-THROUGH STEPS
1.
Turn MASTER SWITCH ON (see your -10).
2.
Turn on service headlights and operate beam selector switch to check that switch works right (see your -10).
3.
Turn all switches OFF (see your -10).
END OF TASK
0333 00-2
