TM 9-2350-277-20-2
REPLACE AIR HEATER IGNITER — Continued
0207 00
INSTALLATION
1.
Thread new electrode (2) into heater box assembly (3). TIGHTEN ELECTRODE TO 180 LB-IN (20 N m) TORQUE.
Use torque wrench with 5/8 inch deep well socket.
2.
Install harness boot end (1) on electrode (2) until positive engagement is felt.
FOLLOW-THROUGH STEPS
1.
Install power plant upper rear access panel (see your -10).
END OF TASK
0207 00-2
