TM 9-2350-277-20-2
REPLACE AIR BOX HEATER WIRING HARNESS — Continued
0205 00
9.
Install bracket (1) and two clamps with three hoses (2) on ignition coil (3). Secure with screw (4) and washer (5). Do not
tighten screw.
10. Connect lead (6) and lead (7) to ignition coil (3). Install ignition coil on bracket (1). Tighten screw.
FOLLOW-THROUGH STEPS
1.
Install power plant rear access panels and support (see your -10).
END OF TASK
0205 00-7/8 blank
