TM 9-2350-277-20-2
REPLACE FUEL RETURN HOSES, TUBES, AND FITTINGS (M1064A3 ONLY) —
Continued
0197 00
40. Install new grommet (6) on fuel return hose (7) and secure through bulkhead.
41. Connect fuel return hose (7) to elbow (5).
42. Connect quick-disconnect (8) to coupler nose (1).
FOLLOW-THROUGH STEPS
1.
Fill fuel tanks (see your -10).
2.
Connect battery ground strap (see your -10).
3.
Start engine (see your -10). Check for leaks.
4.
Check for leaks in fuel lines.
5.
Stop engine (see your -10).
6.
Install power plant rear access panel (see your -10).
7.
Install rear floor plates (WP 0543 00).
8.
Install heater duct (WP 0706 00).
9.
Start engine (see your -10).
10. Raise and lock ramp (see your -10).
11. Stop engine (see your -10).
END OF TASK
0197 00-15/16 blank
