TM 9-2350-277-20-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING
LUBRICATION INSTRUCTIONS — Continued
0155 00
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE
IF:
90
Semi-
Annual
Ramp Non-Skid
Winterization
Kit (M1064A3
Only)
a. Check non-skid plates for cracks. Tighten loose
mounting plate bolts. Replace cracked plates
(WP 0738 00).
91
Semi-
Annual
0.4
Carrier
a. Lubricate steering control lever and shaft
bearings.
NOTE
When grease fittings will not accept GAA,
notify your supervisor.
1) Every 150 hours/1500 miles or
semi-annually, lubricate bearings with GAA
through fitting at each end of steering
support and power plant bulkhead. Use
grease gun with flexible adapter. See
Steering Control Bearing Lubrication Table
(Table 8, page 0155 00-23).
2) Clean fittings with cleaning compound
(WP 0928 00, Item 19) prior to lubrication.
Check/lubricate grease fitting points after
washing or fording.
0155 00-144
