FRONT AND/OR REAR BILGE PUMP(S) AND/OR LIGHTS DONT WORKContinued

FRONT AND/OR REAR BILGE PUMP(S) AND/OR LIGHTS DONT WORK

FRONT AND/OR REAR BILGE PUMP(S) AND/OR LIGHTS DONT WORKContinued - TM-9-2350-277-20-1_387

TM-9-2350-277-20-1 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
285

TM 9-2350-277-20-1 FRONT AND/OR REAR BILGE PUMP(S) AND/OR LIGHTS DON’T WORK—Continued 0080 00 3Y 1. Turn MASTER SWITCH to OFF. 2. Check continuity between bilge pump body (1) and ground lead (2). 3. Is there continuity? YES NO 3YN 1. Replace ground lead 10886459 to bilge pump (WP 0632 00), front; (WP 0635 00), rear. 2. Verify no faults found. 4Y 1. Replace bilge pump (WP 0632 00), front; (WP 0635 00), rear. 2. Verify no faults found. BY 1. Remove BILGE PUMP ON indicator lens (1) and bulb (2). 2. Check continuity between bulb center contact and bulb base. 3. Is there any continuity? YES NO BYN 1. Replace BILGE PUMP ON indicator light bulb (WP 0286 00). 2. Verify no faults found. 0080 00-2

Privacy Statement
Press Release
Contact