TM 9-2350-277-20-1
TRANSMISSION HIGH TEMP INDICATOR COMES ON—Continued
0072 00
2Y
1. Stop engine (see your -10).
2. Remove plug (1) from MAIN port (2) on top of filter housing.
3. Install 4730-231-5632 elbow (3) into MAIN port (2).
4. Remove quick disconnect (4) and adapter (5) from test hose (6).
5. Install test hose (6) onto elbow (3).
6. Start engine (see your -10).
7. With engine at 600 rpm, measure MAIN pressure with
transmission in R, and then in 1-4 position. Use 400 psi gauge.
Pressure should be 280-325 psi in R. Pressure should be 190-210
psi in 1-4 position.
8. Does pressure tester indicate an incorrect reading?
YES
NO
GO TO BY (PAGE 0072 00-4)
0072 00-2
