TM 9-2350-277-20-1
CARRIER DOES NOT MOVE IN ANY SHIFT LEVER POSITIONContinued
0062 00
Y
1. Stop engine (see your -10).
2. Place transmission controller in 1-4 position.
3. Turn MASTER SWITCH ON.
4. Measure voltage between each socket on harness 12349810 plug
(1) and ground.
5. Does multimeter read less than 18 volts at sockets A (2) or C (3),
or more than 0 volts at any remaining sockets?
YES
NO
YN
1. Faulty transmission. Beyond unit
maintenance repair.
2. Notify supervisor.
2Y
1. Turn MASTER SWITCH OFF.
2. Remove harness 12349810 plug (1) from harness 12349813 jack
(2) at carrier bulkhead.
3. Turn MASTER SWITCH ON.
4. Measure voltage between each socket on harness 12349813 jack
(2) and ground.
5. Does multimeter read less than 18 volts at sockets A (3) or C (4),
or more than 0 volts at any remaining sockets?
YES
NO
2YN
1. Faulty transmission control wiring
harness 12349810. Beyond unit
maintenance repair.
2. Notify supervisor.
0062 00-2