TM 9-2350-277-20-1
CARRIER MOVES WITH TRANSMISSION IN SL—Continued
0061 00
2Y
1. Remove harness 12349810 plug (1) from transmission jack (2).
2. Turn MASTER SWITCH ON.
3. Measure voltage between each socket on harness 12349810 plug
(1) and ground. Multimeter should read 18 volts or more at
sockets B (3), D (4), and E (5), and 0 volts for all remaining
socket checks.
4. Does multimeter read less than 18 volts for sockets B, D, and E,
and does not read 0 volts for all other sockets?
YES
NO
2YN
1. Faulty transmission. Beyond unit
maintenance repair.
2. Notify supervisor.
3Y
1. Remove harness 12349810 plug (1) from harness 12349813 jack
(2) at carrier bulkhead.
2. Measure voltage between each socket on harness 12349813 jack
(2) and ground. Multimeter should read 18 volts or more for
sockets B (3), D (4), and E (5), and 0 volts for the remaining
socket checks.
3. Does multimeter read less than 18 volts for sockets B, D, and E,
and does not read 0 volts for all other sockets?
YES
NO
3YN
1. Faulty transmission control wiring
harness 12349810. Beyond unit
maintenance repair.
2. Notify supervisor.
0061 00-2
