TM 9-2350-277-20-1
TRANS FILTER CLOGGED INDICATOR MALFUNCTIONS
0059 00
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Multimeter (WP 0926 00, Item 30)
Jumper Wire
Personnel Required
Unit Mechanic
Helper (H)
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Trim vane lowered (see your -10)
Power plant access door open (see your -10)
T
1. Turn MASTER SWITCH to ON.
2. Is TRANS FILTER CLOGGED indicator off?
YES
NO
GO TO AY (PAGE 0059 00-4)
Y
1. Remove TRANS FILTER CLOGGED indicator cover lens (1),
gasket (2), bulb (3), and gasket (4).
2. Check continuity between bulb base and bulb center contact.
3. Does multimeter indicate continuity?
YES
NO
YN
1. Replace TRANS FILTER
CLOGGED indicator bulb
(WP 0287 00).
2. Verify no faults found.
2Y
1. Measure voltage between indicator assembly center contact and
ground.
2. Does multimeter read 17 volts or more?
YES
NO
GO TO BY (PAGE 0059 00-6)
0059 00-1
