TRANSMISSION TRUNNION CAPS REPAIR

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
37

TRANSMISSION TRUNNION CAPS REPAIR MATING/REPLACING A Remove speedometer adapter (1) at transmission. B Remove two bolts (2) and two lockwashers (3). C Remove and discard defective trunnion cap (4). NOTE Identify cap with stamp die as left or right front trunnion cap (LF = Left Front, RF = Right Front). D Install replacement cap (5). E Install two bolts (2) and two lockwashers (3). NOTE Primary filter bracket must be removed to torque right trunnion cap bolts. F Torque bolts (2) to 80-90 lb-ft. G H Measure clearance between cap and support with feeler gage. INSTALLATION Compute thickness of shims required by subtracting 0.006 A Install shims (6) on supports (7). inch from clearance measured in Step G. B Install replacement cap (5). I Remove two bolts (2) and two lockwashers (3). C Install two bolts (2) and two lockwashers (3). J Remove cap (5). D Torque bolts (2) to 80-90 lb-ft. TA309695 3-15 TM 9-2350-267-34

Privacy Statement
Press Release
Contact