6-106
TM 9-2350-267-20
INTERCOM CABLE CX4723/VRC 20 FT: REMOVAL AND INSTALLATION
REMOVAL
WARNING
Turn OFF MASTER switch. Disconnect battery
ground cable.
A
Disconnect cable (1) connecter from intercom amplifier
power source (2).
B
Remove three retaining straps (3) from cable (1) and nine re-
taining straps (4) by removing one screw (5), one flat washer
(6) and one lockwasher (7) from each strap.
NOTE
Do not remove other wiring harnesses from
retaining straps. Reinstall straps, screws and
washers.
C Remove three screws (8), three flat washers (9), three
lockwashers (10) and guard (11).
D Disconnect cable (1) from drivers intercom (12).
E Remove cable (1) from vehicle.
INSTALLATION
Reverse removal procedures.
TA311137