DECAL REPLACEMENT
WARNING
Dry-cleaning solvent (PD-680) is toxic and flammable.
To prevent personal injury when using PD-680, use only
in a well ventilated area Avoid breathing vapors. If you
become dizzy get fresh air immediately and seek medical
attention. Avoid contact with eyes, skin and clothing. Use
protective goggles, gloves, and clothing. If contact is
made, immediately flush with water and seek medical
attention. The flashpoint for Type I dry-cleaning solvent
is 100° F (38° C); for Type II it is 140° F (60° C). Do not
use near open flame or excessive heat.
NOTE
Note position of decal prior to removal to ensure proper
installation.
A Remove damaged decal and clean surface with dry-cleaning solvent (item 20,
Appx D). Discard decal.
2-306.31/(2-306.32 blank)
Change 4
NOTE
Surface area must be clean and dry before attaching
new decal.
B
Remove protective backing from new decal and position on surface.
C Using a dry rag, press deal into position. Start in the center and press
outward to remove any air bubbles.
TM 9-2350-267-20