STACKER HYDRAULIC TUBING, HOSES AND ASSOCIATED CONNECTING PARTS

STACKER HYDRAULIC TUBING. HOSES AND ASSOCIATED CONNECTING PARTS

STACKER HYDRAULIC TUBING, HOSES AND ASSOCIATED CONNECTING PARTS - TM-9-2350-267-20_1478

TM-9-2350-267-20 Carrier Ammunition Tracked M992 (2350-01-110-4660) Manual
Page Navigation
1363

STACKER HYDRAULIC TUBING, HOSES AND ASSOCIATED CONNECTING PARTS: REMOVAL AND INSTALLATION (CONTINUED) INSTALLATION M N o P Q R S T U V W Disconnect two hoses (33) from elbows (34). Remove elbows (34) from counterbalance valve (35). Disconnect hose (29) from elbow (36). Remove elbow (36) and packing (37) from shuttle valve (38). Discard packing. Disconnect tube (43) from adaptex (44) and tee (45). Remove adapter (41) and packing (42) from shuttle valve (38). Discard packing. Disconnect tube (43) from adapter (44) and tee (45). Remove adapter (44) and packing (46) from shuttle valve (38). Discard packing. . Q Disconnect hose (47) from tee (45) and elbow (48). . R Disconnect hose (49) from elbow (50) and tee (40). Remove counterbalance valve (35) by removing two screws (52) and two lockwashers (53). Discard lockwashers. emove tee (45), bushing (54) and elbows (50 and 55) from counterbalance valve (35). Remove tee (40) and bushing (56) from elbow (57). Remove elbows (48 and 57) from nipples (58 and 59). Remove nipples (58 and 59) from back of hydraulic control panel (51). A B c D E F G H I J K NOTE Apply pipe sealant (item 57, Appx D) to all male pipe threads prior to installation. Install nipples (58 and 59) to back of hydraulic control panel (51). Install elbows (48 and 57) on nipples (58 and 59). Install busing (56) and tee (40) on elbow (57). Install elbows (50 and valve (35). Install counterbalance lockwashers (53). 55), bushing (54) and tee (45) on counterbalance valve (35) with two screws (52) and two new Connect hose (49) to elbow (50) and tee (40). Connect hose (47) to tee (45) and elbow (48). Install new packing (46) and adapter (44) on shuttle valve (38). Connect tube (43) to adapter (44) and tee (45). Install new packing (42) and adapter (41) on shuttle valve (38). Connect tube (39) to adapter (41) and tee (40). Install new packing (37) and elbow (36) on shuttle valve (38). Connect hose (29) to elbow (36). Install two elbows (34) on counterbalance valve (35). Connect two hoses (33) to two elbows (34). TA313163 16-35 Change 1 TM 9-2350-267-20

Privacy Statement
Press Release
Contact