HEATER FUEL FILTER AND TUBES: REMOVAL, DISASSEMBLY , ASSEMBLY AND INSTALLATION
INITIAL SETUP
Materials/Parts:
Teflon tape (item 60, Appx D)
REMOVAL
A Remove fire extinguisher mountings #1 and #3 (p 14-30).
NOTE
When opening fuel system, use a suitable con-
tainer to catch a few ounces of fuel.
B Disconnect personnel heater fuel inlet hose (1) at elbow (2).
C Disconnect fuel pump to filter tube (3) at elbow (4).
D Remove two screws (5), two lockwashers (6), two flat
washers (7) and fuel filter head (8) with attached parts.
Discard lockwashers.
E Remove elbows (2 and 4) from filter head (8).
DISASSEMBLY
Unscrew bowl (9), releasing preformed packing (10) and filter ele-
ment (11). Discard packing.
TA313133
14-69
Change 1
TM 9-2350-267-20