AFES MANUAL DISCHARGE SYSTEM: DISASSEMBLY AND ASSEMBLY (CONTINUED)DISASSEMBLYASSEMBLYA Install plug (19) in housing (5).A Remove four screws (1), four lockwashers (3), four flat washers(2) and cover (4) from actuator housing (5). Discard lockwashers.B Install flat washer (18) and pin (17) in arm (12). Secure with newcotter pin (16).BCompress and remove spring (6). Remove two spring guides (7).C Loosely install setscrew (15) in pin (17).C Remove two shouldered screws (8 and 9) and arm (10).D Install arm (12) on block (13) with shouldered screw (14).D Remove shouldered screw (11), arm (12) and block (13).EInstall arm (12) with block (13) in housing (5) with shoulderedE Remove shouldered screw (14) and arm (12) from block (13).screw (11).FRemove setscrew (15) and cotter pin (16) from pin (17). DiscardF Install arm (10) on block (13) and housing (5) with shoulderedcotter pin.screws (8 and 9).G Remove pin (17) and flat washer (18) from arm (12).G Install two spring guides (7); one in housing (5) and one on block(13).H Remove plug (19) from housing (5).H Install spring (6) between two spring guides (7).IInstall cover (4) on housing (5) with four screws (1), four newlockwashers (3) and four flat washers (2).14-54.7/(14-54.8 blank)Change 3TM 9-2350-267-20
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business