ENGINE AFES RELAYS COVER: REMOVAL AND INSTALLATION (CONTINUED)
REMOVAL
WARNING
Do not allow metal objects (screwdriver, wrench, ete.)
to cross any relay terminals. Crossing terminals may
cause accidental discharge of AFES extinguisher bottles.
A Remove engine T/A panel bracket (p 14-39).
B
Remove AFES relays cover (1) by removing four screws (2), four flat
washers (3) and four lockwashers (4). Discard lockwashers.
INSTALLATION
A Install AFES relays cover (1) using four screws (2), four flat washers (3) and
four new lockwashers (4).
B
Replace engine T/A panel bracket (p 14-39).
14-35
Change 4
TM 9-2350-267-20
