TM 9-2350-267-10
COMMANDER’S SEAT - Continued
Stowing
WARNING
To avoid injury, sit on seat to
apply downward pressure on
seat before adjusting height-
adjusting handle.
1 Apply downward pressure to seat
and pull adjusting handle (1) for-
ward. Press seat to its lowest point.
Release handle and slowly release
pressure until seat locks into posi-
tion.
2. Remove quick-release
pin (2). Push footrest (3)
in as far as it will go.
Aline pin holes of inner
and outer footrest tubes
and insert quick-release
pin (2).
3. Remove quick-release
pin (4) and pivot backrest
(5) down. Aline pin holes
and insert quick-release
pin (4).
2-110
